Biltbest Window Parts

Here is a list of the Biltbest Window cranks and hardware we stock for their casement windows. We carry operators, hinges and weather-stripping, available for same day shipping and pick-up.

 

 1. replacement operator kits (these replace the original which is no longer available)

2. replacement of broken window lock handles - L62 or R62 on the back of lock

*ship us your original lock with the snapped teardrop handle and the 2 mounting screws - we install a new handle with extreme tensile strength - we sand, paint and grease the lock*

 1. beige leaf style pvc seal that fits into a kerf all around the entire window sash

2. vertical side frame offset bulb weather-seal (this is a bulb the sash closes against on the left and right sides to seal out drafts)

3. horizontal bulb frame weather-seal - attaches to the hinge tracks (both top and bottom to seal out drafts)

4. dual arm Entryguard operators (used with the plastic snap on covers)

*for visible glass widths 15" or greater - (11" visible glass uses the Dyad operator - special order)*

5. replacement hinges - simply unscrew the original and install the replacements

6. replacement goldtone crank or T handles, sash tracks and pivot brackets

7. clear pine interior operator sill covers (these conceal the window operator and hold the screen at the sill)

 

 

 

*The Spirit series sash is 1-1/4" thick and is manufactured with 5/8" thick insulated glass - this window was manufactured all wood or aluminum clad exterior. The Spirit series sash has butt joint exterior aluminum cladding - the vertical aluminum runs the full height of the sash and the horizontal aluminum butts in between the vertical - The original aluminum cladding is removable and will fit perfectly on our replacement sash - We manufacture all sash from solid one piece clear pine or 50 year rot proof accoya - the glass pocket and the exterior are primed by hand using INSL-X Stix urethane acrylic while the interior is sanded and unfinished*